CONFERENCE PUBBLICATION

2016

[1]   P. Arpaia, M. Buzio, E. De Matteis, O. Dunkel,  “Magnetic field mapper based on rotating coil”, Proc. of 20th IMEKO TC10 Symposium, Milano, Italy, June 27-28, 2014.

[2]   D. Alesini, P. Arpaia, A. Giribono, A. Liccardo, A. Mostacci, L. Palumbo, L. Sabato, C. Vaccarezza, A. Variola, “Metrological Characterization of the Bunch Length System Measurement of the ELI – NP Electron Linac”, Proc. of 20th IMEKO TC10 Symposium, Milano, Italy, June 27-28, 2014.

[3]   P. Arpaia, P. Cimmino, “Flexible Firmware Architecture for Smart Transducers Networks”, Proc. of 20th IMEKO TC10 Symposium, Milano, Italy, June 27-28, 2014.

[4]   P. Arpaia, U. Cesaro, P. Cimmino, N. Moccaldi, “Drug Under Skin Meter (DUSM): a portable bio-impedance spectroscope for assessing transdermal drug delivery”, Proc. of 20th IMEKO TC10 Symposium, Milano, Italy, June 27-28, 2014.

[5]   P. Arpaia, U. Cesaro, N. Moccaldi, “Measuring the drug absorbed by biological tissues in laboratory emulation of dermatological topical treatments”, IEEE International Symposium on Medical Measurements and Applications, IEEE MEMEA 2016, Benevento, Italy, May 15-18, 2016.

[6]   P. Arpaia, C. Baccigalupi, M. Martino “Design of a Real-Time Acquisition System for the CLIC Klystron Modulators Control Loop”, IEEE International Instrumentation and Measurement Technology Conference, IEEE I2MTC 2016, May 23-26, 2016, Taipei, Taiwan.

[7]   D. Alesini, P. Arpaia, A. Giribono, A. Liccardo, A. Mostacci, L. Palumbo,L. Sabato, C. Vaccarezza, A. Variola, “Metrological Characterization of the Bunch Length Measurement by Means of RF Deflector at the ELI-NP Compton Gamma”, 7th International Particle Accelerator Conference, May 8-13, 2016, BEXCO, Busan Korea.

[8]   P. Arpaia, K. Artoos, M. Buzio, D. Caiazza, N. Catalan Lasheras, A. Cherif, I. Doytchinov, J.F. Fuchs, A. Gaddi, N. Galindo Munoz , J.C. Gayde , S. W. Kamugasa , H. Mainaud Durand, M. Modena , P. Novotny, S. Russenschuck, C. Sanz, G. Severino, D. Tshilumba, V. Vlachakis, M. Wendt, S. Zorzetti, “Sensors applications within the research framework of the PACMAN Project on metrology for particle accelerators at CERN”, IEEE Sensors Applications, April 20 - 22, 2016 Catania, Italy.

2015

[9]   P. Arpaia, D. Caiazza, G. Deferne, C. Petrone, S. Russenschuck, “Advances in stretched and oscillating-wire methods for magnetic measurement”, 9th International Conference on Sensing Technology, ICST 2015, 8-10 December, 2015, Auckland, New Zealand.

[10]  P. Arpaia, D. Caiazza, C. Petrone, S. Russenschuck, “Uncertainty analysis of a vibrating-wire system for magnetic axes localization”, 9th International Conference on Sensing Technology, ICST 2015, 8-10 December, 2015, Auckland, New Zealand.

[11]  P. Arpaia, M. Buzio, O. Dunkel, M. D’Arco, S. Russenschuck, G. Severino, “Performance analysis of miniaturized PCB coils for small-aperture magnet qualification”, IEEE SENSORS 2015, November 1-4, Busan (Korea), 2015.

[12]  P. Arpaia, C. Baccigalupi, M. Martino“Design of a Real-Time Acquisition System for the CLIC Klystron Modulators Control Loop”, IEEE Sensors 2015, November 1-4, Busan (Korea), 2015.

[13]  P. Arpaia, D. Caiazza, C. Petrone, S. Russenschuck, “Performance of the stretched- and vibrating-wire techniques and correction of background fields in locating quadrupole magnetic axes”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[14]P. Arpaia, P. Cimmino, M. D’Arco, L. Fiscarelli, A. Parrella, “Metrological characterization of an enhanced Fast Digital Integrator for magnetic measurements”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[15]  P. Arpaia, E. De Matteis, V. Inglese, “Perspectives of software for measurement automation”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[16]  P. Arpaia, M. Girone, A. Liccardo, M. Pezzetti, F. Piccinelli, “Surface response-based performance assessment of a virtual-flowmeter based transducer for helium monitoring”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[17]  P. Arpaia, C. Baccigalupi, M. Cerqueira Bastos, M. Martino “Design of a 1 ms real-time low-noise data acquisition for power converters control loop”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[18]  P. Arpaia, M. Buzio, L. De Vito, M. Kazazi, S. Russenschuck “Uncertainty analysis for a moving fluxmeter”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[19]P. Arpaia, L. De Vito, M. Girone, M. Pezzetti, “Fault detection based on noise power estimation for cryogenic cold compressors with active magnetic bearings”, XXI IMEKO World Congress, September 914, 2015, Praha, Czech Republic.

[20] P. Arpaia, M. Girone, M. Hubatka, M. Pezzetti, “Active magnetic bearings system upgrade for LHC cryogenic cold compressor, radiations mitigation project (R2E)”, International Conference on Accelerator & Large Experimental Physics (ICALEPCS 2015), Melbourne, Australia, 17-23 October 2015.

[21]   G. Montenero, P. Arpaia, A. Ballarino, and L. Bottura, “Commissioning of a Cryogenic DC Superconducting Current Transformer for the operation of a 70 kA Superconducting Transformer at the CERN cable test facility”, Proc. of 12th European Conference on Applied Superconductivity (EUCAS 2015) Lione, France 6-12 September 2015.

[22]  P. Arpaia, C. Baccigalupi, M. Martino, “Metrological Characterization of an Ultra-low Noise Acquisition System for Fast Voltage Pulses Measurements”, IEEE International Instrumentation and Measurement Technology Conference, Pisa, Italy May 11-14, 2015.

2014

[23]  P. Arpaia, M. Buzio, E. De Matteis, O. Dunkel, S. Russenschuck “Experimental Characterization of a Rotating Coil Transducer for Local Multipole Scanning”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[24]  P. Arpaia, E. De Matteis, D. De Paola, M. Sosin, “Comparative assessment of signal cable impact in differential capacitive position measurements”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[25]P. Arpaia, P. Cimmino, L. Fiscarelli, “Enhanced fast digital integrator for magnetic measurements”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[26]  P. Arpaia, C. Baccigalupi, M. Martino, “Extreme Value Statistical Characterization of Time Domain Pulse-to-Pulse Measurements”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[27]  P. Arpaia, C. Baccigalupi, M. Cerqueira Bastos, M. Martino, “Design of an Ultra-Low Noise Analogue Front-End for Fast Voltage Pulses Measurement”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[28]  P. Arpaia, M. Buzio, S. Russenschuck, G. Severino, “Feed-down calibration of sensing coil radius using one-error harmonic reference”,Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[29]  P. Arpaia, M. Buzio, M. Kazazi, S. Russenschuck, “A fluxmeter based on translating coils for axially-symmetric magnets”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[30]  P. Arpaia, M. Girone, D. Maisto, C. Manna, M. Pezzetti, “Generalized extremal optimization of predictive maintenance to enhance monitoring of large experimental systems”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[31]  P. Arpaia, L. Sabato, “Surface response-based design of standard inductances for minimizing parasitic capacitances”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[32]  P. Arpaia, D. Caiazza, C. Petrone, S. Russenschuck, “Challenges in measuring the longitudinal field profile of a magnet by a vibrating wire”, Proc. of 20th IMEKO TC4 Symposium, Benevento, Italy, September 15-17, 2014.

[33]  P. Arpaia, A. Ballarino, L. Bottura, G. Montenero “Design, Assembly and Commissioning of a Cryogenic DC Current Transformer Designed for Measuring Currents of up to 80 kA”, IEEE Applied Superconductivity Conference, ASC 2014, Charlotte, North Carolina, 10 – 15 August 2014.

2013

[34]  P. Arpaia, A. Ballarino, V. Daponte, D. Maisto, G. Montenero, C. Svelto, “A smart current control for superconducting cable test”, Proc. of 19th IMEKO TC4 Symposium, Barcelona, Spain, July 18-19, 2013.

[35]  P. Arpaia, C. Petrone, S. Russenschuck, L. Walckiers, “Multipole-field correction of stretched-wire measurements of the gradient in accelerator magnets”, Proc. of 19th IMEKO TC4 Symposium, Barcelona, Spain, July 18-19, 2013.

2012

[36]   P. Arpaia, P. Cimmino, E. De Matteis, G. D’Addio, “A balance board device for home care telerehabilitation exergaming”, XX IMEKO World Congress, September 914, 2012, Busan, Korea.

[37]   P. Arpaia, L. Fiscarelli, L. Walckiers, “Calibration of rotating coil arrays for particle accelerator magnet testing”, XX IMEKO World Congress, September 914, 2012, Busan, Korea.

[38]  P. Arpaia, C. Petrone, S. Russenschuck, “Measuring multipole field errors in magnet apertures of large aspect ratio by means of an oscillating wire on elliptic trajectories”, XX IMEKO World Congress, September 914, 2012, Busan, Korea.

[39]  P. Arpaia, P. Cimmino, L. De Vito, L. Fiscarelli, “Offset correction in a digital integrator for rotating coil measurements”, XX IMEKO World Congress, September 914, 2012, Busan, Korea.

[40]  P. Arpaia, C. Petrone, L. Walckiers, “Experimental validation of solenoid magnetic centre measurement by vibrating wire system”, XX IMEKO World Congress, September 914, 2012, Busan, Korea.

2011

[41]P. Arpaia, M. Buzio, F. Caspers, G. Golluccio, C. Petrone, “Static Metrological Characterization of a Ferrimagnetic Resonance Transducer for Real-Time Magnetic Field Markers in Particle Accelerators”, IEEE International Instrumentation and Measurement Technology Conference, Hangzhou, P. R. China May 10-12, 2011.

[42]P. Arpaia, M. Buzio, J. J. Garcia Perez, G. Golluccio, C. Petrone, L. Walckiers, “Magnetic field measurements on small magnets by vibrating wire systems”, IEEE International Instrumentation and Measurement Technology Conference, Hangzhou, P. R. China May 10-12, 2011.

[43]  G. D’Addio, P. Cimmino, C. Manna, P. Arpaia, “A Telemedicine Home Care Based Activity Monitor Device”, IEEE International Symposium on Medical Measurements and Applications, Bary, Italy, May 30-31, 2011.

[44]P. Arpaia, M. Buzio, F. Caspers, G. Golluccio, D. Oberson, “Metrological Performance of a Ferrimagnetic Resonance Marker for the Field Control of the CERN Proton Synchrotron”, 22nd Magnet Technology Conference, Marseille, France, 11–16 September 2011, successively in press on IEEE Transaction on Applied Superconductivity.

2010

[45]P. Arpaia, M. Buzio, G. Golluccio, G. Montenero, “Eddy Current Modeling and Measuring in Fast-Pulsed Resistive Magnets”, IEEE International Instrumentation and Measurement Technology Conference, Austin, 3-6 May 2010.

[46]P. Arpaia, M. Buzio, O. Dunkel, D. Giloteaux, G. Golluccio, “A Measurement System for Fast-Pulsed Magnets: a case study on Linac4 at CERN”, IEEE International Instrumentation and Measurement Technology Conference, Austin, 3-6 May 2010.

[47]P. Arpaia, M. Buzio, L. Fiscarelli, G. Montenero, L. Walckiers, “High-performance Permeability Measurements: A Case Study at CERN”, IEEE International Instrumentation and Measurement Technology Conference, Austin, 3-6 May 2010.

[48]  P. Arpaia, M. Buzio, L. Fiscarelli, G. Montenero, J. G. Perez, L. Walckiers, “Compensation of Third-Harmonic Field Error in LHC Main Dipole Magnets”, IEEE International Instrumentation and Measurement Technology Conference, Austin, 3-6 May 2010.

[49]  P. Arpaia, E. De Matteis, G. Montenero, C. Manna “Evolutionary Design of Lifting Scheme Wavelet-Packet Adaptive Filters for Elevator Fault Detection”, IEEE International Instrumentation and Measurement Technology Conference, Austin, 3-6 May 2010.

[50]  P. Arpaia, M. Buzio, O. Dunkel, D. Giloteaux, G. Golluccio, A. Lombardi, F. Mateo, S. Ramberger, “Magnetic measurements of permanent and fast-pulsed quadrupoles for the CERN Linac4 project”, IPAC'10, 1st International Particle Accelerator Conference, Kyoto, May 23-28, 2010.

[51]  P. Arpaia, L. Bottura, M. Buzio, O. Dunkel, L. Fiscarelli, G. Montenero, J. G. Perez, E. Todesco, L. Walckiers, “Measurement and scaling laws of the sextupole component in the LHC dipole magnets”, IPAC'10, 1st International Particle Accelerator Conference, Kyoto, May 23-28, 2010.

[52]  P. Arpaia, C. Manna, "Development of a Web-Service e-Diagnostic and e-Maintenance Framework for Industrial Monitoring", Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[53]  P. Arpaia, F. Donnarumma, C. Manna, "A differential discrete particle swarm optimization approach to model predictive control of building temperature", Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[54]  P. Arpaia, E. De Matteis, C. Manna, " An Evolutionary Lifting Scheme Wavelet Packet Decomposition method for mechanical fault detection in elevator systems", Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[55]   P. Arpaia, G. D’Addio, C. Manna, G. Montenero, "Swarm intelligence-based assessment in home care pulmonary monitoring", Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[56]  P. Arpaia, M. Buzio, G. Golluccio, F. Mateo, “In-situ calibration of rotating coil magnetic measurement systems: a case study on Linac4 magnets at CERN”, Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[57]  P. Arpaia, N. Cardines, L. Fiscarelli, C. Petrone, “Design of an on-line dynamic magnetic flux analyzer based on double-buffer sliding DFT”, Proc. of 17th IMEKO TC4 Symposium, Kosice, Slovakia, Sept. 2010.

[58]P. Arpaia, F. Donnarumma, S. Manfredi, C. Manna, “Model Predictive Control Strategy Based on Differential Discrete Particle Swarm Optimization”, 2010 IEEE Workshop on Environmental, Energy, and Structural Monitoring Systems, Taranto, Italy, 9 September 2010.

[59]P. Arpaia, D. Maisto, C. Manna, “A Generalized Extremal Optimization-inspired Algorithm for Predictive Maintenance Scheduling Problems”, ICEC 2010 - Proceedings of the International Conference on Evolutionary Computation, [part of the International Joint Conference on Computational Intelligence IJCCI 2010], Valencia, Spain, October 24 - 26, 2010.

2009

[60]  P. Arpaia, M. Buzio, L. Fiscarelli, V. Inglese, G. La Commara, L. Walckiers, “Measurement-Domain Specific Language for Magnetic Test Specifications at CERN”, IEEE International Instrumentation and Measurement Technology Conference, 5-7 May 2009.

[61] P. Arpaia, F. Clemente, C. Manna, G. Montenero, “Automatic modeling based on cultural programming for osseointegration diagnosis”, IEEE International Instrumentation and Measurement Technology Conference, 5-7 May 2009.

[62]  P. Arpaia, C. Manna, G. Montenero, “Ant-based search strategy for industrial multiple-fault diagnostics”, XIX IMEKO World Congress, September 611, 2009, Lisbon, Portugal.

[63]  P. Arpaia, V. Inglese, G. La Commara, “Software quality characterization of the flexible framework for magnetic measurements at CERN”, XIX IMEKO World Congress, September 6-11, 2009, Lisbon, Portugal.

[64]  P. Arpaia, G. Golluccio, M. Buzio, “Measurement of eddy current transients in fast-cycled linac quadrupole magnets at CERN”, XIX IMEKO World Congress, September 6-11, 2009, Lisbon, Portugal.

[65]  P. Arpaia, V. Inglese, M. Buzio, “Flexibility experimental test of the software framework for magnetic measurements at CERN”, XIX IMEKO World Congress, September 611, 2009, Lisbon, Portugal.

[66]P. Arpaia, M. Buzio, L. Fiscarelli, V. Inglese, G. La Commara, “Automatically-generated user interfaces for measurement software frameworks: a case study on magnetic permeability at CERN”, XIX IMEKO World Congress, September 6-11, 2009, Lisbon, Portugal.

2008

[67]P. Arpaia, M. L. Bernardi, L. Bottura, M. Buzio, L. Deniau, G. Di Lucca, V. Inglese, J. G. Perez, G. Spiezia, L. Walckiers, “Kernel Design of a Flexible Software Framework for Magnetic Measurements at CERN”, IEEE Instrumentation and Measurement Technology Conference, 12-15 May 2008, pp. 607 – 611.

[68]P. Arpaia, M. L. Bernardi, G. Di Lucca, V. Inglese, G. Spiezia, “Aspect Oriented-based Software Synchronization in Automatic Measurement Systems”, IEEE Instrumentation and Measurement Technology Conference, 12-15 May 2008, pp. 1718–1721.

[69]P. Arpaia, M. Bernardi, G. Di Lucca, V. Inglese, G. Spiezia, "An Aspect Oriented-based Software Architectural Framework for Synchronization in Measurement Systems", Proc. of 16th IMEKO TC4 Symposium, Florence, Italy, Sept. 2008.

[70]  P. Arpaia, M. Buzio, V. Inglese, G. Spiezia, "Experimental qualification of the platform for magnetic measurements at CERN", Proc. of 16th IMEKO TC4 Symposium, Florence, Italy, Sept. 2008.

[71]  P. Arpaia, M. Buzio, V. Inglese, "Data Reduction Algorithms for Magnetic Measurement Pre-processing at CERN", Proc. of 16th IMEKO TC4 Symposium, Florence, Italy, Sept. 2008.

[72]  P. Arpaia, G. Spiezia, "Performance analysis of the PXI-based bus communication of a fast digital integrator for magnetic measurements", Proc. of 16th IMEKO TC4 Symposium, Florence, Italy, Sept. 2008.

[73]P. Arpaia, F. Clemente, C. Manna, " In-vivo assessment of skin impedance recovery after low-voltage pulses electroporation", Proc. of 16th IMEKO TC4 Symposium, Florence, Italy, Sept. 2008.

2007

[74]  P. Arpaia, V. Inglese, G. Spiezia, “Metrological Characterization of an Improved DSP-based On-Line Integrator for Magnetic Measurement at CERN”, IEEE Instrumentation and Measurement Technology Conference, Warsaw, Poland, May 1-3 2007.

[75]  P. Arpaia, V. Inglese, G. Spiezia, S. Tiso, “Error Modelling of a Fast Digital Integrator for Magnetic Measurements at CERN”, IEEE Instrumentation and Measurement Technology Conference, Warsaw, Poland, May 1-3 2007.

[76]P. Arpaia, L. Bottura, M. Buzio, D. Della Ratta, L. Deniau, V. Inglese, G. Spiezia, S. Tiso, L. Walckiers, “A Flexible framework for generating magnetic measurement automatic systems at CERN”, IEEE Instrumentation and Measurement Technology Conference, Warsaw, Poland, May 1-3 2007.

[77]P. Arpaia, F. Clemente, C. Romanucci “In-vivo Test Procedure and Instrument Characterization for EIS-Based Diagnosis of Prosthesis Osseointegration”, IEEE Instrumentation and Measurement Technology Conference, Warsaw, Poland, May 1-3 2007.

[78]  P. Arpaia, M. Bernardi, G. Di Lucca, V. Inglese, G. Spiezia, “Fault Self-Detection of automatic testing systems by means of Aspect-Oriented Programming”, Proc. of 15th IMEKO TC4 Symposium, Iasi, Romania, Sept. 2007.

[79] P. Arpaia, P. Cimmino, F. Clemente, C. Romanucci “A Microcontroller-based Instrument for Prostheses Osseointegration Measurement by Electrochemical Impedance Spectroscopy” Proc. of 15thIMEKO TC4 Symposium, Iasi, Romania, Sept. 2007.

[80]   P. Arpaia, L. Bottura, V. Inglese, G. Spiezia, “A flexible framework for magnetic measurements at CERN”: a prototype for the new generation rotating coils”, Proc. of 15th IMEKO TC4 Symposium, Iasi, Romania, Sept. 2007.

[81]   P. Arpaia, M. Rapone, A. Zanesco, “Quantum-Inspired Evolutionary Classification of Driving Behaviour for Vehicle Emission Factors Determination”, Proc. of 15th IMEKO TC4 Symposium, Iasi, Romania, Sept. 2007.

[82]  P. Arpaia, P. Cimmino, F. Clemente, A. Panaggio, “A real-time non-invasive system monitoring hemodynamic parameters in critical conditions by peripheral blood pressure wave analysis”, Proc. of 15th IMEKO TC4 Symposium, Iasi, Romania, Sept. 2007.

[83]  P. Arpaia, L. Bottura, V. Inglese, G. Spiezia, “La nuova piattaforma flessibile per le misure magnetiche al CERN”, memoria invitata al XXIII Congresso Nazionale del Gruppo Misure Elettriche ed Elettroniche, GMEE, Torino (Italy), September 11-13, 2007.

2006

[84]  P. Arpaia, C. Romanucci, A. Zanesco, “Optimal design of wavelet filters based on lifting scheme by means of cultural algorithms”, IEEE IMTC '06, 24-27 April 2006, pp. 1245 – 1251.

[85]  P. Arpaia, L.. Bottura, P. Cimmino, D. Giloteaux, A. Masi, J. Garcia Perez, G. Spiezia, L. Walckiers, “A fast digital integrator for magnetic field measurements at CERN”, IEEE IMTC '06, 24-27 April 2006, pp. 67 – 71.

[86]  P. Arpaia, F, Clemente, A. Zanesco, “Automatic analytical modeling of EIS data by evolutionary programming based on cultural algorithms”, IEEE IMTC '06, 24-27 April 2006, pp. 1786 –1791.

[87]  P. Arpaia, D. Giloteaux, G. Spiezia, “Uncertainty reduction via parameter design of a fast digital integrator for magnetic field measurement”, IEEE CPEM ’06, Turin, Italy, July 9 – 14, 2006.

[88]  P. Arpaia, C. Romanucci, A. Zanesco, “Automatic analytical modelling of dynamic corrosion phenomena by artificial intelligence techniques”, CEOCOR 2006, Lëtzebuerg - Mondorf-les- Bains 2006 May 30 - June 02, 2006.

[89]P. Arpaia, M. Urquidi-MacDonald, C. Romanucci, A. Zanesco “Wavelet-based filtering of EIS corrosion data optimized by cultural algorithms”, CEOCOR 2006, Lëtzebuerg – Mondorf-les- Bains 2006 May 30 - June 02, 2006.

[90]P. Arpaia, C. Romanucci, A. Zanesco, “Performance analysis of culturally optimized wavelet lifting scheme in corrosion data filtering”, 18th IMEKO World Congress, Rio de Janeiro, Brazil, September 17 – 22, 2006.

[91] P. Arpaia, F. Clemente C. Romanucci, A. Zanesco, “Experimental characterization of an EIS-based method for low-invasive diagnosis of prosthesis osseointegration”, 18th IMEKO World Congress, Rio de Janeiro, Brazil, September 17 – 22, 2006.

[92]  P. Arpaia, A. Masi, J. G. Perez, G. Spiezia, “Metrological characterization of a fast digital integrator for magnetic field measurements at CERN”, 18th IMEKO World Congress, Rio de Janeiro, Brazil, September 17 – 22, 2006.

2005

[93]  P. Arpaia, G. Lucariello, A. Zanesco, Multi-Agent Remote Predictive Diagnosis of Dangerous Good Transports”, IEEE IMTC ‘05, Vol. 3, 16-19 May 2005 pp. 1685 – 1690.

2004

[94]  P. Arpaia, C.L. Monteiro, A.C Serra, “Phase-plane characterization of analog-to-digital converters”, Instrumentation and Measurement Technology Conference, IMTC 04, Vol. 1, 18-20 May 2004, pp. 537 – 542.

[95]  M. Allocca, P. Arpaia, M. Urquidi-MacDonald, “A DSP-based measurement algorithm for corrosion monitoring and diagnostics”, CEOCOR 2004, Dresden (D), 15th – 16th June, 2004.

2003

[96]  P. Arpaia, F. Avallone, A. Baccigalupi, C. De Capua, C. Landi, Electrical measurement, signal processing, and displays: Power Measurement, John G. Webster Ed., ISBN: 0849317339, CRC Press, 2003, pp. 3.1-3.33.

[97]P. Arpaia, C.L. Monteiro, A.C Serra, “Dual tone analysis for phase-plane coverage in ADC metrological characterization”, IEEE Instrumentation and Measurement Technology Conference, 2003, IMTC '03, Vol. 2, 20-22 May 2003, pp. 1334 – 1339.

[98]  IEEE Std 181-2003, IEEE Standard on Transitions, Pulses, and Related Waveforms, July 2003.

[99]P. Arpaia, C.L. Monteiro, A.C Serra, “A frequency-domain approach to ADC phase-plane modeling and testing”, IWADC 2003, Perugia, September 2003, pp. 171-174.

2002

[100]  P. Arpaia, L. Michaeli, S.Rapuano, “Compensation of intrinsic nonlinearity of SAR ADCs”, IEEE Instrumentation and Measurement Technology Conference, 2002, IMTC/2002. Vol. 1, 21-23 May 2002, pp. 725 – 730.

[101]  P. Arpaia, D. Grimaldi, “Metrological performance optimisation of a displacement magnetic transducer“, Instrumentation and Measurement Technology Conference, 2002, IMTC/2002, Vol. 2, 21-23 May 2002, pp. 1295 – 1300.

[102]   P. Arpaia, L. De Vito, S. Rapuano, G. Truglia, “A Measurement Instrument for Fault Diagnosis in QAM-based Telecommunications”, Proc. of 12th IMEKO International Symposium, Zagreb, September 25-27, 2002.

2001

[103]  F. Alegria, P. Arpaia, A. M. da Cruz Serra, P. Daponte, “ADC histogram test by triangular small-waves”, Procs. 18th IEEE Instrumentation and Measurement Technology Conference, 2001. IMTC 2001. Volume 3, 21-23 May 2001, pp. 1690 – 1695.

[104]  C.L.Monteiro, P. Arpaia, P.; A. M. Serra, “Phase-spectrum analysis for detection of ADC hysteretic distortion”, Proceedings of the 18th IEEE Instrumentation and Measurement Technology Conference, 2001. IMTC 2001. Volume 3, 21-23 May 2001 Page(s):1677 – 1683 vol.3.

[105]  P. Arpaia, M. D’Apuzzo, S. Esposito, R. Schiano Lo Moriello, “ SiO2-P2O5 thin-film humidity sensor: metrological characterization”, IMEKO TC-4 Int. Symp., Lisboa (Pt), 13-14 Sept., 2001.

[106]   P. Arpaia, R. Schiano Lo Moriello, “Metrological Characterization Based on a Computer Aided Experimental Design of a Frequency Response Analyzer”, Proc. of Congr. ISCS2001, pp.150-161, 6-7 December, 2001, Napoli.

[107]   P. Arpaia, N. Polese, “Uncertainty reduction in measurement systems by statistical parameter design”, 6th IMEKO TC-4 Int. Symp., Lisboa, Sept., 2001.

[108]  P.Arpaia, N.Polese, “Ottimizzazione delle caratteristiche metrologiche di un sistema di misura mediante tecniche sperimentali di progettazione statistica dei parametri”, Tutto Misure, 2001.

2000

[109]   P. Arpaia, H. Kobayashi, H. Sugawara, “Some thoughts on sine wave ADC Testing”, "Instrumentation and Measurement Technology Conference", IEEE IMTC-2000, Baltimora, 2- 4 May, 2000, pp.125-131.

[110]   P. Arpaia, P. Daponte, L. Michaeli, I. Saliga, “Reduction of ADC systematic errors by oversampling”, 5th“IMEKO International Workshop on ADC Modelling and Testing”, Vienna (A), September 2000.

[111]   P. Arpaia, P. Mikulik, “Dynamic Error Correction of Integrating Analog-to-Digital Converters using Volterra Filtration”, 5th“IMEKO International Workshop on ADC Modelling and Testing”, Vienna (A), September 2000.

[112]  P. Arpaia, P. Daponte, F. Maccaro, S. Rapuano, “Characterisation and Modelling of the ADC Jitter”, 5th“IMEKO International Workshop on ADC Modelling and Testing”, Vienna (A), September 2000.

[113]  P.Arpaia, "Tecniche di analisi dei risultati di misura", Capitolo 6, contributo richiesto dall’Editor in Chief N. Polese per “Misure per la qualità dei beni e dei servizi”, Opera Universitaria, EDISU Napoli, Marzo 2000, pp.180-215, rivisto e pubblicato in N. Polese, “Misure per la gestione”, Edizioni Scientifiche Italiane, December 2000, pp. 171-208.

[114]  P.Arpaia, "La progettazione degli esperimenti", Capitolo 7, contributo richiesto dall’Editor in Chief N. Polese per “Misure per la qualità dei beni e dei servizi”, Opera Universitaria, EDISU Napoli, Marzo 2000, pp.216-248, rivisto e pubblicato in N. Polese, “Misure per la gestione”, Edizioni Scientifiche Italiane, December 2000, pp. 209-234.

[115]  P.Arpaia, "Tecniche sperimentali di ottimizzazione parametrica", Capitolo 8, contributo richiesto dall’Editor in Chief N. Polese per “Misure per la qualità dei beni e dei servizi”, Opera Universitaria, EDISU Napoli, Marzo 2000, pp.249-279, rivisto e pubblicato in N. Polese, “Misure per la gestione”, Edizioni Scientifiche Italiane, December 2000, pp. 235-260.

[116]  P. Arpaia, et al., (TC-10, IEEE Instrumentation and Measurement Society), “Standard for Terminology and Test Methods for Analog-to-Digital Converters”, IEEE Standard 1241, December 2000.

[117]  P. Arpaia, P. Daponte, M. Marinov, "Measurement Systems Distributed on Geographical Networks for Educational Purposes", IEEE International Workshop on Virtual and Intelligent Measurement Systems, 29-30 April 2000, Annapolis, MD; USA.

1999

[118]  P. Arpaia, P. Daponte, D. Grimaldi, L. Michaeli, "Systematic error correction for experimentally modeled sensors by using ANNs", Proc. of "Instrumentation and Measurement Technology Conference", IEEE IMTC-99, Venezia, 18-21 May, 1999, pp. 1635-1640.

[119]P.Arpaia, F.Cennamo, P.Daponte, "Metrological Characterisation of Analog-to-digital Converters - A State of the Art", Proc. of 3rd "Advanced A/D and D/A Conversion Techniques and their Applications", IEE ADDA-99, Glasgow (UK), 26-28 July, 1999, pp. 134-144.

[120]  P. Arpaia, P. Daponte, Y. D. Sergeyev, “A-priori statistical parameter design of ADCs by a local tuning algorithm of global optimisation”, Proc. of 4th “IMEKO International Workshop on ADC Modelling and Testing ”, Bordeaux (F), 9-10 September 1999, pp.236-244.

[121]  P. Arpaia, P. Daponte, I. Kale, “Metrological Characterisation of High-Performance ∆−ΣModulator for Instrumentation”, Proc. of 4th “IMEKO International Workshop on ADC Modelling and Testing”, Bordeaux (F), 9-10 September 1999, pp.128-131.

[122]P. Arpaia, P. Daponte, L. Iannelli, L. Michaeli, “A method for the Optimal Compensation of Dynamic Nonlinearity in SAR ADCs”, Proc. of 4th “IMEKO International Workshop on ADC Modelling and Testing”, Bordeaux (F), 9-10 September 1999, pp. 159-165.

1998

[123]P.Arpaia (ed.), "Analog-to-digital converter metrology - State of the art in Italy", "10th TC-4 International IMEKO Symposium on Development in Digital Measuring Instrumentation", Napoli (I), 17-18 September 1998, pp.989-995.

1997

[124]P.Arpaia, A.Baccigalupi, F.Cennamo, M.D’Apuzzo, "Remote Characterization of Scan Conversion-based Transient Digitizers", Proc. of "Instrumentation and Measurement Technology Conference", IEEE IMTC-97, Ottawa, 19-21 May, 1997, pp.1009-1014.

[125]P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte, "Ethernet Application Perspectives for Distributed Measurement Systems", Proc. of XIV IMEKO World Congress, Tampere (FIN), 1-6 June 1997, vol. IVA, pp.13 -18.

[126]P.Arpaia, P.Daponte, L.Michaeli, "Dynamic Error Model of SAR A/D Converters", Proc. Of 2nd “IMEKO International Workshop on ADC Modelling”, parallel event at XIV IMEKO World Congress, Tampere (FIN), 1-6 June 1997, vol. IVB, pp.291 -296.

1996

[127]   P.Arpaia, F.Cennamo, P.Daponte, “An Algorithmic Model for Correcting Scan Converter Distortions”, Proc. of “IMEKO International Workshop on ADC Modelling”, Smolenice Castle, 7-9 May, 1996, pp.94-99.

[128]  P.Arpaia, A.Baccigalupi, F.Cennamo, P.Daponte, “A Distributed Measurement Laboratory on Geographic Network”, "8thTC-4 International IMEKO Symposium on New Measurement and Calibration Methods of Electrical Quantities and Instruments", Budapest, 16-17 September 1996, pp.294-297.

[129]  P.Arpaia, F.Cennamo, P.Daponte, M.Savastano, “Modelling and Remote Measurements on Scan Converters”, Proc. of "ISCS ‘96”, Roma, 18-19 December, 1996, pp.189-196.

1995

[130]  P.Arpaia, A.Baccigalupi, F.Cennamo, M.D'Apuzzo, "Testing Uncertainty of Scan Converter-based Transient Digitizers", Proc. of "7th International IMEKO Symposium on Modern Electrical and Magnetic Measurement", Praga, 13-14 September 1995, part 3, pp.619-623.

[131]                  P.Arpaia, C.Liguori, A.Pietrosanto, "An Index for the Evaluation of Flexible Measurement Systems", Proc. of "7th International IMEKO Symposium on Modern Electrical and Magnetic Measurement", Praga (CZ), 13-14 September 1995, part 3, pp.666-671.

1994

[132]P.Arpaia, F.Cennamo, P.Daponte, M.D'Apuzzo, "Diagnosis of Analog to Digital Converters by means of Walsh Transforms", Proc. of XIII IMEKO World Congress "From Measurement to Innovation”, Torino, 5-9 September 1994, vol.1, pp-398-403.

[133]  P.Arpaia, A.Baccigalupi, A. Pietrosanto, "VXI-based Measurement Stations: An Approach to the characterization", Proc. of XIII IMEKO World Congress "From Measurement to Innovation”, Torino, 5-9 September 1994, vol.1, pp. 588-593.

1992

[134][8] P.Arpaia, "Sistemi Flessibili di Misura per Applicazioni Industriali", Tesi di Dottorato in Ingegneria Elettrotecnica, IV Ciclo, Dipartimento di Ingegneria Elettrica, Febbraio 1992, reviewed on IEEE Instrumentation and Measurement Newsletter, n.120, Summer, 1993, p.9.

1991

[135]   P.Arpaia, G. Betta, A. Langella, "An Expert Generator of Measurement Specifications", Proc. of 12th IMEKO World Congress on “Measurement and Progress”, Bejing (C), 5-10 September 1991, pp.1767-1772.

1990

[136]P.Arpaia, A. Langella, "Un Approccio Metodologico all'Automazione delle Misure in Ambiente Industriale", memoria invitata al Congresso "Prospettive delle Misure Elettriche ed Elettroniche", Gruppo Misure Elettriche ed Elettroniche (GMEE) CNR, Padova, 20-22 September 1990, pp.72-80.

[137]   A. Langella, P.Arpaia, M. Ianniruberto, "A Flexible and Reconfigurable Measurement Station", Proc. of “4thInternational IMEKO Symposium on Measurement of Electrical Quantities”, Varna, 15-17 November 1990, pp.37-42.

[138]  A. Langella, P.Arpaia, G. Betta, M. Ianniruberto, C. Lombardi, "Expert Systems for the Optimum Configuration of Measurement Stations: The Supply Section Module", Proc. of “4th International IMEKO Symposium on Measurement of Electrical Quantities”, Varna, 15-17 November 1990, pp.311-316.

[139]   A. Ambrosini, P. Arpaia, D. Cerra, "Un Sistema Automatico per il Controllo Integrato della Qualità", Proc. of Convegno "System Approach to Automation", FAST, Milano, 28-29 November 1990, pp.845-855.

1989

[140]P.Arpaia, A. Baccigalupi, C. Landi, "Système Automatique de Monitoring, Controle et Diagnostic On-Line d'une Installation de Protection Cathodique pour Reseaux de Structures", Proc. of "II International Conference” of “Committee on the study of Pipe Corrosion and Protection” (CEOCOR), Napoli, 17-19 May 1989, pp.337-353.

Layout Type

Presets Color

Background Image